DCN/DCU/DCR双活塞回转油缸
DCN/DCU/DCR双活塞回转油缸 DCN70-25 DCN87-40 DCU40-80 DCU50-48 DCR40-80 DCR50-95
双活塞油缸带有4路配油环，用于单**的驱动每一个油缸，每个油缸都带有行程控制，大油缸带有安全阀，中心通孔用于冷却液、油或空气的输送，并且带有用来安装旋转接头的螺纹。
安装方式;螺钉从后面固定。
| Application/customer`s benefit
Actuation or retractable jaw chuck with power operated face drivers/power chuck with part-ejector/power chucks with retractable axial stop/finger chucks with power operated centering fixture/chucks typ TPT-C with 2 piston actuation
|
|
Technical features
Double piston cylinder with 4 way oil manifold for separate actuation of the cylinders
Horizontal or vertical installation
Stroke control on each cylinder, safety valves on the big cylinder
Thorugh-hole for coolant, oil or air with thread for rotary union
Mounting from the rear side with bolts
A 10 µm filter in pressure line is requested
Use oil HM32 ISO 3448
|
Standard equipment
Double piston cylinder
Mounting screws
stroke control on each cylinder
Proximity bracket (without proximity switch)
|
Ordering example
Double piston cylinder
DCN 125-30 or
Double piston cylinder
DCN 125-30 with rotary union
(optional)
|
|
